Gallery — Project / Lab Report

The decreasing of groundwater quality has been the major issue in Tangerang area. One of the key process is the interaction between groundwater and Cisadane river water, which flows over volcanic deposits of Bojongmanik Fm, Genteng Fm, Tuf Banten, and Alluvial Fan. The objective of this study is to unravel such interactions based on the potentiometric mapping in the riverbank. We had 60 stop sites along the riverbank for groundwater and river water level observations, and chemical measurements (TDS, EC, temp, and pH). Three river water gauge were also analyzed to see the fluctuations. We identified three types of hydrodynamic relationships with fairly low flow gradients: effluent flow at Segmen I (Kranggan - Batuceper) with 0.2-0.25 gradient, perched flow at Segmen II (Batuceper-Kalibaru) with gradient 0.2-0.25, and influent flow at Segmen III (Kalibaru-Tanjungburung) with gradient 0.15-0.20. Such low flow gradient is controlled by the moderate to low morphological slope in the area. The gaining and losing stream model were also supported by the river water fluctuation data. TDS and EC readings increased more than 40% from upstream to downstream. At some points the both measurements were two times higher than the permissible limits, along with the drops of pH values at those areas. This study shows the very close interaction between Cisadane river water and groundwater in the riverbank. Therefore the authorities need to be managed the areas with a very strict regulations related to the small and large scale industries located near by the river.

A nice report I did for my Radiative Processes Course.

Template da UFRPE para plano de trabalho para os editais PIBIC FACEPE. O plano deve conter até 04 (quatro) páginas, excetuando-se a capa e incluindo-se as referências.

Template de projeto de pesquisa nos padrões do edital universal CNPq.

Example report for the MNR lab

A lab report template in Russian. Шаблон отчёта по лабораторным работам (Версия от 15.02.2016) предназначен для использования студентами каф. ПМиИ СамГТУ при оформлении отчетов по лабораторным работам. Для настройки пакета listigs использовался материал статьи Михаила Конника aka virens [http://mydebianblog.blogspot.ru/2012/12/latex.html] Copyright (c) 2016 by Mikhail Saushkin (msaushkin@gmail.com) All rights reserved except the rights granted by the Creative Commons Attribution 4.0 International Licence

This simulation plan aims to explain and document all steps to be taken in the simulation analysis of the Fokker-100 case. This case is the scenario in which the aircraft touches the ground during landing, introducing loads on the landing gear. The landing gear consists of 2 rear gears around mid-span and one in the front. Furthermore, the pilot uses the rudder which induces a lateral force on the tail. As stated in the assignment, it is required to find the maximum normal stress and location of this in the fuselage, the maximum shear stress and its location in the fuselage, and the maximum shear flow in the frames that introduce the loads from the landing gears into the fuselage.

Chicago Style History Paper which includes figures with \usepackage{wrapfig} and \begin{wrapfigure}

La solucion a un problema dado consiste en encontrar un camino desde un nodo representando el estado inicial, hasta el estado final deseado.