\begin
Discover why 18 million people worldwide trust Overleaf with their work.
\documentclass[a4paper]{article}
\usepackage{Odyssey2024}
\usepackage{epsfig,amssymb,amsmath}
\ninept
\setcounter{page}{1}
\sloppy % better line breaks
\title{Paper Template for Odyssey 2024}
\name{John Doe}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% If multiple authors, uncomment and edit the lines shown below. %%
%% Note that each line must be emphasized {\em } by itself. %%
%% (by Stephen Martucci, author of spconf.sty). %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\makeatletter
%\def\name#1{\gdef\@name{#1\\}}
%\makeatother
%\name{{\em Firstname1 Lastname1, Firstname2 Lastname2, Firstname3 Lastname3,}\\
% {\em Firstname4 Lastname4, Firstname5 Lastname5, Firstname6 Lastname6,
% Firstname7 Lastname7}}
%%%%%%%%%%%%%%% End of required multiple authors changes %%%%%%%%%%%%%%%%%
\address{Department of Template Design \\
University of Wherever, Acountry \\
{\small \tt jdoe@uow.ac} }
%
\begin{document}
\maketitle
%
\begin{abstract}
This is a layout specification and template definition for the
papers of Odyssey 2024 Conference, which will be held in Quebec,
Canada, Jun 18 -- 21, 2024. This template has evolved from
the Odyssey 2014 template that traces back to Eurospeech 2001 and
aims at producing conference proceedings in electronic form.
The format is essentially the one used for the IEEE ICASSP conferences, but using the standard A4 paper size.
\end{abstract}
%
\section{Introduction}
This template can be found on the conference website. Please use
either one of the template files found on this website when preparing your
submission. If there are special questions or wishes regarding
paper preparation and submission for Odyssey 2024, correspondence
should be addressed to \mbox{$<$info@odyssey2024.org$>$.}
Information for full paper submission is available on the web at
$<$http://www.odyssey2024.org$>$ under which you also will find
instructions for paper preparation and usage of templates.
\section{Page layout and style}
The page layout should match with the following rules. A highly
recommended way to meet these requirements is to use one of the
templates provided and to check details against this example
file. If for some reason you cannot use any of the templates, please
follow these rules as carefully as possible, or contact the
organizers at \mbox{$<$info@odyssey2024.org$>$} for further
instructions.
\subsection{Basic layout features}
\begin{itemize}
%\itemsep -1.3mm
\item Proceedings will be printed in A4 format. The layout is
designed so that the papers, when printed in US Letter format, will include
all material but the margins will not be symmetric. PLEASE TRY TO MAKE YOUR
SUBMISSION IN A4 FORMAT, if possible, although this is not an
absolute requirement. \item Two columns are used except for the
title part and possibly for large figures that need a full page
width. \item Left margin is 20 mm. \item Column width is 80 mm.
\item Spacing between columns is 10 mm. \item Top margin 25 mm
(except first page 30 mm to title top). \item Text height (without
headers and footers) is maximum 235 mm. \item Headers and footers
must be left empty (they will be added for printing). \item Check
indentation and spacing by comparing to this example file (in
PDF).
\end{itemize}
\subsubsection{Headings}
Section headings are centered in boldface
with the first word capitalized and the rest of the heading in
lower case. Sub-headings appear like major headings, except they
start at the left margin in the column.
Sub-sub-headings appear like sub-headings, except they are in italics
and not boldface. See examples in this
file. No more than 3 levels of headings should be used.
\subsection{Fonts}
The font used for the main text is Times. The recommended
font size is 9 points which is also the minimum allowed size.
Other font types may be used if needed for special purposes. Remember,
however, to embed all the fonts in your final PDF file!
LaTeX users: DO NOT USE THE Computer Modern FONT FOR TEXT (Times is
specified in the style file). If possible, make the final
document using POSTSCRIPT FONTS since, for example, equations with
non-PS Computer Modern are very hard to read on screen.
\subsection{Figures}
All figures must be centered in the column (or page, if the figure spans
both columns).
Figure captions should follow each figure and have the format given in
Fig. \ref{spprod}.
Figures should preferably be line drawings. If they contain gray
levels or colors, they should be checked to print well on a
high-quality non-color laser printer.
If some figures contain bitmap images, please ensure that their resolution
is high enough to preserve readability.
\subsection{Tables}
An example of a table is shown as Table \ref{table1}. Somewhat
different styles are allowed according to the type and purpose of the
table. The caption text may be above or below the table.
\begin{table}[th]
\caption{\label{table1} {\it This is an example of a table.}}
\vspace{2mm}
\centerline{
\begin{tabular}{|c|c|}
\hline
ratio & decibels \\
\hline \hline
1/1 & 0 \\
2/1 & $\approx$ 6 \\
3.16 & 10 \\
10/1 & 20 \\
1/10 & -20 \\
100/1 & 40 \\
1000/1 & 60 \\
\hline
\end{tabular}}
\end{table}
\subsection{Equations}
Equations should be placed on separate lines and numbered. Examples
of equations are given below.
Particularly,
%
%\vspace{-3mm}
\begin{equation}
x(t) = s(f_\omega(t))
\label{eq1}
\end{equation}
where \(f_\omega(t)\) is a special warping function
\begin{equation}
f_\omega(t)=\frac{1}{2\pi j}\oint_C \frac{\nu^{-1k}d\nu}
{(1-\beta\nu^{-1})(\nu^{-1}-\beta)}
\label{eq2}
\end{equation}
A residue theorem states that
\begin{equation}
\oint_C F(z)dz=2 \pi j \sum_k Res[F(z),p_k]
\label{eq3}
\end{equation}
Applying (\ref{eq3}) to (\ref{eq1}),
it is straightforward to see that
\begin{equation}
1 + 1 = \pi
\label{eq4}
\end{equation}
%
Finally we have proven the secret theorem of all speech sciences.
No more math is needed to show how useful the result is!
%
\begin{figure}[t]
\includegraphics[width=\columnwidth]{paper_completion.pdf}
\caption{{\it This is an example of a figure.}}
\label{spprod}
\end{figure}
%
\subsection{Page numbering}
Final page numbers will be added later to the document electronically. {\em
Please do not include any headers or footers!}
\subsection{References}
The reference format is the standard IEEE one.
References should be numbered in order of appearance,
for example \cite{aluisio2001learn}, and later this one \cite{swales1987writing},
and even later these other three \cite{day2012write,teufel2000,berkenkotter1989social}.
\section{Discussion}
This is the discussion. This is the discussion. This is the discussion.
This is the discussion. This is the discussion. This is the discussion.
This is the discussion. This is the discussion. This is the discussion.
This is a boring discussion. This is the discussion. This is the discussion.
This is the discussion. This is the discussion. This is the discussion.
\section{Conclusion}
This template can be found on the conference website
$<$http://www.odyssey2024.org$>$.
\bibliographystyle{IEEEbib}
\bibliography{Odyssey2024_BibEntries}
% This could be also done as follows:
%
%\begin{thebibliography}{10}
%\bibitem[1]{aluisio2001learn}Sandra M. Alu\'{i}sio, Iris Barcelos, Jandir Sampaio, and Osvaldo
%N. Oliveira Jr, ``How to learn the many unwritten
%``rules of the game'' of the academic discourse: a hybrid
%approach based on critiques and cases to support scientific
%writing,'' in Proceedings of the IEEE International Conference
%on Advanced Learning Technologies, Madison, USA,
%August 2001, pp. 257–260.
%\bibitem[2]{swales1987writing} John Swales and Hazem Najjar, ``The writing of research
%article introductions,'' Written communication, vol. 4, no.
%2, pp. 175–191, 1987.
%\bibitem[3]{day2012write} Robert Day and Barbara Pastel, How to write and publish
%a scientific paper, Cambridge University Press, 2012.
%\bibitem[4]{teufel2000} Simone Teufel, Argumentative zoning: information extraction
%from scientific text, Ph.D. thesis, University of Edinburgh,
%2000.
%\bibitem[5]{berkenkotter1989social} Carol Berkenkotter, Thomas N. Huckin, and John Ackerman,
%``Social context and socially constructed texts: The
%initiation of a graduate student into a writing research community.
%technical report no. 33.,'' Tech. Rep., Center for
%the Study of Writing, University of California Berkeley \&
%Carnegie Mellon University, 1989.
%\end{thebibliography}
\end{document}