%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Masters/Doctoral Thesis
% LaTeX Template
% Version 2.3 (25/3/16)
%
% This template has been downloaded from:
% http://www.LaTeXTemplates.com
%
% Version 2.x major modifications by:
% Vel (vel@latextemplates.com)
%
% This template is based on a template by:
% Steve Gunn (http://users.ecs.soton.ac.uk/srg/softwaretools/document/templates/)
% Sunil Patel (http://www.sunilpatel.co.uk/thesis-template/)
% Yee Shian Henry Tong
%
% Template license:
% CC BY-NC-SA 3.0 (http://creativecommons.org/licenses/by-nc-sa/3.0/)
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Note: To include the bibliography -> run pdflatex main.tex > bibtex main.aux > pdflatex main.tex > pdflatex main.tex
%----------------------------------------------------------------------------------------
% PACKAGES AND OTHER DOCUMENT CONFIGURATIONS
%----------------------------------------------------------------------------------------
\documentclass[
12pt, % The default document font size, options: 10pt, 11pt, 12pt
%oneside, % Two side (alternating margins) for binding by default, uncomment to switch to one side
%chapterinoneline,% Have the chapter title next to the number in one single line
english, % ngerman for German
doublespacing, % Single line spacing, alternatives: singlespacing, onehalfspacing or doublespacing
%draft, % Uncomment to enable draft mode (no pictures, no links, overfull hboxes indicated)
%nolistspacing, % If the document is onehalfspacing or doublespacing, uncomment this to set spacing in lists to single
%liststotoc, % Uncomment to add the list of figures/tables/etc to the table of contents
%toctotoc, % Uncomment to add the main table of contents to the table of contents
%parskip, % Uncomment to add space between paragraphs
%nohyperref, % Uncomment to not load the hyperref package
%headsepline, % Uncomment to get a line under the header
]{setting} % The class file specifying the document structure
\usepackage[utf8]{inputenc} % Required for inputting international characters
\usepackage[T1]{fontenc} % Output font encoding for international characters
\usepackage{palatino} % Use the Palatino font by default
\usepackage[backend=bibtex,style=numeric-comp,sorting=none,natbib=true]{biblatex} % Use the bibtex backend with the authoryear citation style (which resembles APA)
\addbibresource{main.bib} % The filename of the bibliography
\usepackage[autostyle=true]{csquotes} % Required to generate language-dependent quotes in the bibliography
\usepackage{multirow}
\usepackage{mathrsfs}
\usepackage{amssymb}
\usepackage{amsmath}
\usepackage{pgfmath}
\usepackage{pgffor}
\usepackage{pdflscape}
\usepackage{rotating}
\usepackage{lineno}
\usepackage{enumitem}
\usepackage{courier}
\usepackage{booktabs}
\usepackage{afterpage}
\usepackage[final]{pdfpages}
%\usepackage{hyperref}
\renewcommand{\arraystretch}{1.2}
\DeclareMathOperator{\erf}{erf}
\newcommand\blankpage{
\null
\thispagestyle{empty}
\addtocounter{page}{-1}
\newpage
}
%----------------------------------------------------------------------------------------
% MARGIN SETTINGS
%----------------------------------------------------------------------------------------
\geometry{
paper=a4paper, % Change to letterpaper for US letter
inner=2.0cm, % Inner margin 2.5cm
outer=2.2cm, % Outer margin 3.8cm
bindingoffset=2cm, % Binding offset
top=1.5cm, % Top margin
bottom=1.5cm, % Bottom margin
%showframe,% show how the type block is set on the page
}
%----------------------------------------------------------------------------------------
% THESIS INFORMATION
%----------------------------------------------------------------------------------------
\thesistitle{Search for Dark Matter (Test)} % Your thesis title, this is used in the title and abstract, print it elsewhere with \ttitle
\supervisor{Jones Davies} % Your supervisor's name, this is used in the title page, print it elsewhere with \supname
\examiner{Empty} % Your examiner's name, this is not currently used anywhere in the template, print it elsewhere with \examname
\degree{Master of Physics} % Your degree name, this is used in the title page and abstract, print it elsewhere with \degreename
\author{Jack Smith} % Your name, this is used in the title page and abstract, print it elsewhere with \authorname
%\addresses{} % Your address, this is not currently used anywhere in the template, print it elsewhere with \addressname
%\subject{Physical Sciences} % Your subject area, this is not currently used anywhere in the template, print it elsewhere with \subjectname
%\keywords{} % Keywords for your thesis, this is not currently used anywhere in the template, print it elsewhere with \keywordnames
\university{National Central University} % Your university's name and URL, this is used in the title page and abstract, print it elsewhere with \univname
\department{Department of Physics} % Your department's name and URL, this is used in the title page and abstract, print it elsewhere with \deptname
%\group{High Energy Physics Experiment} % Your research group's name and URL, this is used in the title page, print it elsewhere with \groupname
%\faculty{} % Your faculty's name and URL, this is used in the title page and abstract, print it elsewhere with \facname
\hypersetup{pdftitle=\ttitle} % Set the PDF's title to your title
\hypersetup{pdfauthor=\authorname} % Set the PDF's author to your name
%\hypersetup{pdfkeywords=\keywordnames} % Set the PDF's keywords to your keywords
\begin{document}
\frontmatter % Use roman page numbering style (i, ii, iii, iv...) for the pre-content pages
\pagestyle{plain} % Default to the plain heading style until the thesis style is called for the body content
\includepdf{NCUCoverTemplate.pdf} % please use your
\afterpage{\blankpage} % Add a new blank page without page number
%----------------------------------------------------------------------------------------
% TITLE PAGE
%----------------------------------------------------------------------------------------
\begin{titlepage}
\begin{center} \setstretch{1.15}
{\Large \bfseries \ttitle \par}
\bigskip
{\normalsize by \par}
\bigskip
{\large \authorname \par}
\bigskip
{\normalsize Submitted to the \deptname \par in partial fulfillment of the requirements for the degree of \par}
\bigskip
{\large \degreename \par}
\bigskip
{at the \par}
\bigskip
{\large \MakeUppercase{\univname} \par}
\bigskip
{\normalsize November 2016 \par}
\bigskip
{\textcopyright \space \univname \space 2016. All rights reserved. \par}
\bigskip \bigskip \bigskip
\begin{flushleft}
{\large Author \dotfill \par}
\end{flushleft}
\begin{flushright}
{\deptname \par \today \par}
\end{flushright}
\begin{flushleft}
{\large Certified by \dotfill \par}
\end{flushleft}
\begin{flushright}
{\supname \par Associate Professor \par Thesis Supervisor \par}
\end{flushright}
\begin{flushleft}
{\large Accepted by \dotfill \par}
\end{flushleft}
\begin{flushright}
{\examname \par Professor \par Chairman, Thesis Committee \par}
\end{flushright}
\end{center}
\end{titlepage}
%\cleardoublepage
%----------------------------------------------------------------------------------------
% ABSTRACT PAGE
%----------------------------------------------------------------------------------------
\begin{abstract} \setstretch{1.15}
% \addchaptertocentry{\abstractname} % Add the abstract to the table of contents
\noindent{\large \textbf{Abstract} \par}
\bigskip
\noindent{A search for heavy resonances decaying to a Higgs boson and a $Z$ boson is presented. The analysis is based on the data collected in 2015 with the CMS detector at a center-of-mass energy $\sqrt{s}$ = 13 TeV, corresponding to an integrated luminosity of 2.51 $fb^{-1}$. The Higgs bosons are reconstructed from high momentum $b\bar{b}$ quark pairs that are detected as a single massive jet, while the Z bosons are reconstructed from electron pairs and muon pairs. The analysis is separated in electron and muon channels, with single and double b-tag categories. A 95\% upper limit on the production cross section of $\sigma_{X}\times \mathcal{B}(X\rightarrow ZH)$ is derived from the combination of four categories with a limit of 0.063 $pb$ to 0.265 $pb$ for $m_X$ from 800 to 4000 GeV. \par}
\bigskip
\noindent{Thesis Supervisor: \space \supname \par}
\noindent{Title: \space Associate Professor \par}
\end{abstract}
\includepdf{ChineseAbstract.pdf}
%----------------------------------------------------------------------------------------
% LIST OF CONTENTS/FIGURES/TABLES PAGES
%----------------------------------------------------------------------------------------
\tableofcontents % Prints the main table of contents
\listoffigures % Prints the list of figures
\listoftables % Prints the list of tables
%----------------------------------------------------------------------------------------
% THESIS CONTENT - CHAPTERS
%----------------------------------------------------------------------------------------
\mainmatter % Begin numeric (1,2,3...) page numbering
\pagestyle{thesis} % Return the page headers back to the "thesis" style
% Include the chapters of the thesis as separate files from the Chapters folder
% Uncomment the lines as you write the chapters
\begin{linenumbers} %Turn line numbers on unless it is the final version
\include{Chapters/Chapter1}
\include{Chapters/Chapter2}
%\include{Chapters/Chapter3}
\end{linenumbers}
%----------------------------------------------------------------------------------------
% BIBLIOGRAPHY
%----------------------------------------------------------------------------------------
{\setstretch{1.15} \sloppy \printbibliography[heading=bibintoc]}
%----------------------------------------------------------------------------------------
\end{document}