\documentclass[
manuscript=article, %% article (default),SpecialIssue,data,software,editorial
layout=publish,
year=2027,
month= June, %check cls
volume=11,
number=x
]{JIKO}
\usepackage{hyphenat}
%%%%++++++++++++++++++++++
\hyphenation{
soft-ware
di-la-ku-kan
di-la-kukan
me-nam-bah-kan
meng-gu-na-kan
}
%%%%++++++++++++++++++++++
\usepackage{algorithm,algpseudocode}
\usepackage{courier,multirow,multicol}
\usepackage{listings}
\usepackage[english]{babel}
\usepackage{blindtext}
\usepackage{sourcesans}
\usepackage[utf8]{inputenc}
\usepackage{csquotes}
\lstset{basicstyle=\ttfamily \small , language=python}
\lstset{basicstyle=\ttfamily \small, language=html}
\lstset{basicstyle=\ttfamily \small, language=c++}
\doi{10.26798/jiko.}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% By RIKIE - UTDI- JIKO %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\newcommand{\id}{xxx} %Your article ID
\setcounter{page}{15} %Leave it in default condition
\frenchspacing
% --- AREA AUTHOR ---
% Make sure the article title is no more than 12 words
\title{%
\itshape The Article Title Is No More Than 12 Words\\
{\large Subtitle if needed, and Title case}%
}
\newcommand{\judul}{The Article Title Is No More Than 12 Words}
\author{First Author}
\newcommand{\refnama}{F. Author} %Pastikan ini benar
\affiliation{Department, Faculty, Affiliation-1, City, Country}
\email{correspondence@email.ac.id} %---> move this below correspondence author.
\author{Second Author}
\affiliation{Department, Faculty, Affiliation-1, City, Country}
\author{Third Author}
\affiliation{Department, Faculty, Affiliation-2, City, Country}
%------------------------------------ penambahan author
%\author{Penulis Keempat}
%\affiliation{Departmen, Fakultas, Kampus-4, Kota, Negara}
%
%\author{Penulis Kelima}
%\affiliation{Departmen, Fakultas, Kampus-5, Kota, Negara}
%\abbreviations{JIKO: J. Inf. dan Komp.}
\received{22-11-23}
\accepted{23-3-24}
\published{30-3-24}
\keywordsing{JIKO.cls; \ \LaTeX; JIKO; New Template; Special Edition -- "max 5 Words seperated with semicolon (;)"}
%\keywords{JIKO.cls; \ \LaTeX; JIKO; Template baru; Special Edition -- "max 5 kata yang dipisahkan dengan titik koma (;)"}
\begin{document}
%\begin{CJK*}{UTF8}{gbsn}
%%%%%%%%%%%%%% ABSTRAK %%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{abstracting}
The abstract is contained in one paragraph with a maximum of 150 - 250 words, the main aspect of the entire paper. They often include: 1) The overall research objective and research problem; 2) The basic design of the research approach; 3) The main findings as a result of the analysis; and, 4) a brief summary of interpretations and conclusions.
\end{abstracting}
% Mkasimum 5 Kata dalam keywords
% Penting, hanya indeks singkatan jika istilah berisi lebih dari dua kata, dan istilah tersebut digunakan lebih dari sepuluh kali di seluruh makalah. Jika tidak, uraikan secara lengkap di dalam artikel.
%Abstrak Bahasa Indonesia
%\begin{abstract}
% Abstrak merangkum dalam satu paragraf dengan maksimal 150 - 250 kata, aspek utama dari keseluruhan makalah. Mereka sering termasuk: 1) Keseluruhan tujuan penelitian dan masalah penelitian; 2) Desain dasar pendekatan penelitian; 3) Temuan utama sebagai hasil analisis; dan, 4) Ringkasan singkat tentang interpretasi dan kesimpulan.
%\end{abstract}
%%%%%%%%%%%%%%%%%%%%%%%%%%%% PENDAHULUAN %%%%%%%%%%%%%%%%
\section{Introduction}
\textbf{To improve and maintain the quality of JIKO and to achieve international accreditation for JIKO, several changes have been made to the manuscript submission process. Authors are asked to take careful note of these changes.} Authors are asked to take careful note of these changes. Starting with Volume 11, Issue 1 and onwards, JIKO will be published in English and will include several mandatory sections, such as “Author Contributions.” Additionally, JIKO will include an author profile at the end of the full manuscript, complete with a photo of the author.
The introduction is well-structured and consists of three key sections: the first provides a clear background, starting with a general overview and moving on to a specific context, The introduction is organized into three key sections: the first provides a clear background, starting with the general context and moving toward the specific context; the second explains the references relevant to the research so that the position of the study and the latest research on the main topic can be understood; and the third outlines the research objectives and \textbf{once again emphasizes the novelty of the research} \cite{Rikie},\cite{adha2021},\ cite{alden2020}.
Set the page layout to 1 column, justified, and set the paper size to A4. Also, set all margins\hyphenation{sub-figure} according to the template. Edit the text using \ \LaTeX \ \textit{(highly recommended)} or another commonly used \textit{word processing} program, with single spacing, 11 pt font size, and no more than 12 pages \cite{condon2022}.
The introduction should explain the background of the research, the proposed solution, and comparable related work. If there are
citations in the \textit{script}, use [x], [y], or [x, y, z], and so on. Use citation tools such as \textit{Mendeley}, \textit{EndNote}, or \textit{Jabref} to help you create proper citations. Terms in languages other than Indonesian should be written in \textit{italics} or {\color{blue}a different color} to make it easier for the layout team \cite{chung2014}.
Make sure each paragraph consists of more than one sentence. Do not include theories that are widely known or easily found. If you wish to include a theory, make sure it specifically influences your research.
You must write the article in English. Terms in languages other than English should be written in \textit{italics} or {\color{blue}a different color} to make it easier for the layout team to work with.
Use this latest edition of the \textit{LaTeX template} when writing your article; it will help you produce a high-quality article. \textbf{The editorial board reserves the right to reject articles that are not well-structured, do not conform to the provided template, or show signs of plagiarism without undergoing the review process} \cite{hosseinmotlagh2020}.
\textbf{Title}. Keep it concise and informative. Titles are often used in information retrieval systems. Avoid abbreviations and formulas whenever possible; \textbf{NO MORE THAN 12 WORDS}; use uppercase letters\cite{basconcillo2023}. Please choose your paper’s title carefully, using as few words as
possible while still adequately describing the content.
\textbf{Author Names and Affiliations}. Clearly state the first and last names
of each author and verify that all names are spelled accurately; \textbf{DO NOT INCLUDE ACADEMIC TITLES WITH AUTHOR NAMES!!}.
Provide a brief address for each affiliation, including the country name, and
the email address of the corresponding author.
\textbf{Corresponding author.} Indicate who will handle correspondence at all stages
of publication, as well as post-publication. This responsibility includes answering any future questions regarding
methodology and materials. Ensure that an email address is provided, and mark it with \textbf{(*)}.
%%%%%%%%%%%%%%%%%%%%%%%%%%%% METODE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{Method}
The Methods section describes the research steps, outlining the logical sequence for obtaining the study’s results in accordance with expectations and the system description. If there are figures and tables, they must be presented with table and figure captions accompanied by sequential numbers. In the manuscript, citations are numbered sequentially
in square brackets \cite{chung2014,condon2022,fard2022} or can be written as \cite{Rikie},\cite{g2024},\ cite{hafeez2020}, and the table and figure numbers must be sequential, as shown in Table~\ref{contohtabel} and Figure~\ref{subfigure}.
Use high-quality images, such as in Figure~\ref{fig:logo}. Equations must be edited using an equation editor. Equation numbers should be listed sequentially in parentheses, tabulated, and precisely aligned as shown in Equation~\eqref{eq:cauchy_momentum} \cite{hafeez2020}.
\begin{figure}[ht!]
\centering
\subfloat[$\rho^2-\theta_1$ and $\rho^2-\theta_2$]{%
\includegraphics[width=0.25\textwidth]{3a.png}%
}%
\subfloat[$\delta_1-\theta_1$ and $\delta_1-\theta_2$]{%
\includegraphics[width=0.3\textwidth]{3b.png}%
}
\subfloat[The variation of $\theta_1$ ]{%
\includegraphics[width=0.3\textwidth]{3c.png}%
}%
\subfloat[The variation of $\rho^2$ and $\delta_1$]{%
\includegraphics[width=0.25\textwidth]{3a.png}%
}
\medskip
\begin{minipage}{0.9\textwidth}
\small
(a) Evaluated on $(\delta_0, \delta_1)=(0.1,0.01)$ and $(\alpha,\beta)=(1,1)$, \\
(b) Ecaluated on $(\delta_0,\rho^2)=(0.1,1)$ and $(\alpha,\beta)=(1,1)$, \\
and (c) (d) Ecaluated on $\delta_0=0.1$ and $(\alpha,\beta)=(1,1)$.
\end{minipage}
\medskip
\caption{The variations in $\theta_1$ and $\theta_2$ are related to $\rho^2$ and $\delta_1$} \label{subfigure}
\end{figure}
Make sure all captions, legends, or data descriptions in the images are in English. Figures do not always have to appear below or above their captions; be sure to refer to figures using a reference, for example, “... as shown in Figure~\ref{subfigure}...,” “as seen in Figure~\ref{fig:logo}...
\subsection{subsection1}
Some examples of open-source research data~\cite{goudarzi2021} and the tools used \cite{Rikie,condon2022,fard2022}.
\textbf{\textit{SUBFIGURES MAY BE USED IN THIS ARTICLE}}; be sure to explain each image in the subfigure and provide a caption that adequately describes the entire subfigure. You can see an example of a subfigure in Figure~\ref{subfigure}. \\
\textbf{\textit{For your references, include at least 2 articles from JIKO that are relevant to your article.}} You must cite at least 15 references, and \textbf{you must add the DOI of article that you cite} on your references \cite{hosseinmotlagh2020},\cite{hafeez2020},\cite{Rikie}.
\subsection{subsection2}
The final result is shown in Figure \ref{fig:logo}. There is no need to force the figure to appear on the same page as the text; simply ensure that the figure can be easily located even if it appears on a different page\cite{kardi2021},\cite{mahjoub2022},\cite{ramani2019},\cite{tastan2019}.
\begin{figure}[ht!]
\centering
\includegraphics[width=0.3\textwidth]{JIKOlogo.png}
\caption{JIKO}
\label{fig:logo}
\end{figure}
\textbf{The image size can be adjusted—it shouldn’t be too large, so it takes up too much space, or too small, so it’s blurry and hard to read.}
Use the table format below if you want to add a note to a table, as shown in Table~\ref{contohtabel}.
\begin{table}[hbt!]
\begin{threeparttable}
\caption{An Example Table with a Table Legend}
\label{contohtabel}
\begin{tabular}{lll}
\toprule
\textbf{Parameter} & \textbf{Notation} & \textbf{Remarks} \\
\midrule
name & - & engine common identifier \\
manufacture & - & name of the manufacture \\
bpr & $\lambda$ & bypass ratio \\
pr & - & pressure ratio \\
thrust & $T_0$ & maximum static thrust\\
\bottomrule
\end{tabular}
\begin{tablenotes}[hang]
\item[]Note
\item[a]First Note
\item[b]Other table notes.
\end{tablenotes}
\end{threeparttable}
\end{table}
\subsubsection{Subsubsection1 }
Reference to Equation~\ref{eq:cauchy_momentum}, or you can use the (eqref) format equation~\eqref{eq:cauchy_momentum} to reference the equation.
\begin{equation}\label{eq:cauchy_momentum}
d_{ij} = \sqrt{{\sum_{k=1}^{p}}(x_{ik}-y_{jk})^2}
\end{equation}
Where the values of:\\
\begin{tabular}{lcl}
$d_{ij}$ &:& Distance between object i and object j\\
$P$ &:& Number of factors in the cluster\\
$x_{ik}$ &:& Data for subject i on variable k\\
$y_{jk}$ &:& Data for subject j on variable k\\
\end{tabular}
Don’t forget to include a description of your formula, including notation and any other details needed to clarify the formula you’ve written\cite{vishwakarma2019,vats2024,Khanji}.
If you include code in your article, you can format it as shown in the Koding~\ref{lst1} example below. It’s fine if your code is written in a language other than English; there’s no need to italicize it—just format it according to the code you’ve written \cite{maxwell1881treatise,jacobs1963fine,yorozu1987electron}.
\renewcommand{\lstlistingname}{Code}
\begin{lstlisting}[
caption={HTML Code Example},label=lst1,language=html]
<!DOCTYPE html>
<html>
<body>
<h1>My First Heading</h1>
<p>My first paragraph.</p>
</body>
</html>
\end{lstlisting}
If you need to write code in algorithm form, as shown in Algorithm~\ref{alg1}:
\renewcommand{\algorithmname}{Algorithm}
\begin{algorithm}
\caption{Soil Moisture Control System}\label{alg1}
\begin{algorithmic}
\State Initialize and calibrate the YL-69 sensor and the Arduino Mega 2560 microcontroller.
\While{true}
\State Continuously measure soil moisture levels using the YL-69 sensor.
\State Send the soil moisture data to the microcontroller for processing.
\If{soil moisture level $<$ threshold}
\State Activate the DC water pump to add water to the soil.
\EndIf
\State Display the current soil moisture level on the 16x2 LCD screen.
\EndWhile
\State Repeat steps 2–6 continuously to maintain the proper soil moisture level for the agarwood tree.
\end{algorithmic}
\end{algorithm}
\subsubsection{Subsubsection2}
Authors must ensure that they have written a completely original work, and if they have used the work and/or words of others, that these have been properly cited or quoted. The datasets used must be traceable, and the research must be fully replicable using standard procedur \cite{mahjoub2022,vishwakarma2019,}.
%\blindtext
Table \ref{tb:example_table} shows an example from \cite{ramani2019,Rikie,condon2022}.
\begin{table}[H]
\centering
\small
\caption{Example table}
\label{tb:example_table}
\begin{tabular}{lll}
\toprule
\textbf{Parameter} & \textbf{Notation} & \textbf{Remarks} \\
\midrule
name & - & common engine identifier \\
manufacture & - & name of the manufacturer \\
bpr & $\lambda$ & bypass ratio \\
pr & - & pressure ratio \\
thrust & $T_0$ & maximum static thrust\\
\bottomrule
\end{tabular}
\end{table}
Alternatively, you can use a different table format (not intended for long tables), as shown in Table~\ref{standard}. If you must use a longtable, add \verb|\usepackage{longtable}| before \verb|\begin{document}| in your \LaTeX source, and make sure the longtable does not exceed 2 pages.
\begin{table}[ht!]
\centering
\caption{Standard table, not a longtable}
\label{standard}
\begin{tabular}{p{2cm}p{2cm}p{4cm}}\hline
\textbf{Parameter} & \textbf{Notation} & \textbf{Remarks} \\\hline\hline
name & - & engine common identifier \\
manufacture & - & name of the manufacturer \\
bpr & $\lambda$ & bypass ratio \\
pr & - & pressure ratio \\
thrust & $T_0$ & maximum static thrust\\ \hline
\multicolumn{3}{l}{{\scriptsize Source:\cite{Rikie}}}
\end{tabular}
\end{table}
If you need a table with multiple columns and rows, you can use and refer to the example in Table~\ref{multitab}; make sure to add horizontal lines (other than those in the table header and at the end of the table) only if necessary to clarify the table.
\begin{table}[ht!]
\centering \caption{Multicol and Multirow Table} \label{multitab}
\begin{tabular}{lllll}\hline
\textbf{Header 1} & \textbf{Header 2} & \multicolumn{2}{c}{\textbf{Header 3}} & \textbf{Result}\\\hline\hline
\multirow{2}{*}{1}& col2 & col3&col4& 123\\
& row2 & row2 & -- & 321\\ \hline
\end{tabular}
\end{table}
You can add references in the form of \verb|\bibitem{citekey}| or by using a .bib file. Be sure to format your references correctly and use the \textit{IEEE style}. The citations in this template are for illustrative purposes only.
\subsubsection{About References}
Ensure that your references are formatted correctly according to IEEE style, are traceable, and are highly relevant. It is also strongly recommended that more than 90\% of your references be primary sources; include the article’s DOI link (highly recommended). Do not use outdated references; use the most recent ones (from the last 5 years) and ensure that there are at least 20 references relevant to the article.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% HASIL %%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{Results}
A well-written Results section should present factual findings objectively, without interpretation, in a logical sequence that aligns with the research objectives. It must include a narrative summary highlighting the most important findings, supported by properly cited tables and figures that display relevant numerical or visual data. All statistical results should be reported with appropriate test names, values, degrees of freedom, and exact p-values where applicable, while maintaining consistency in decimal places. The text should guide readers through the key findings without repeating every value from tables, and every table and figure must be mentioned in the text. Interpretation and comparison with previous studies belong strictly in the Discussion, not in the Results.
\paragraph{Paragraph title} This is a titled paragraph if you wish to use the function described in the papers \cite{ramani2019,Rikie,condon2022}. Please do not include excessive or repetitive content in this section. In particular, avoid repeating information that readers can already obtain from tables, graphs, etc. \cite{Rikie}.
It is important to provide information on statistical methods so that readers can continue to properly reference the research results.
Regarding statistical tests, necessary information such as the significance level, degrees of freedom, etc., must be provided, while formulas and related information should be mentioned in the methodology section\cite{ramani2019,Rikie,condon2022}.
Rather than providing many numbers, it is better to present them as averages.
This section includes tables, graphs, bar charts, and others. They are presented concisely and succinctly to help readers understand the topic quickly and clearly. Be sure to include a description of your graphs, and ensure that your graphs are clearly legible.
Results should be presented in an order that corresponds to the order of the hypotheses.
You should not attempt to argue the reasons for rejecting or accepting a hypothesis; leave that for the discussion section.
If your findings can be fully explained in a few sentences of text, you do not need to include a table.
\textbf{Separate the results from the discussion} so that we can see how you discuss your research findings.
\begin{enumerate}[noitemsep]
\item This is an enumeration
\begin{itemize}[noitemsep]
\item This is item 1
\item This is item 2
\end{itemize}
\item Enumeration 2
\end{enumerate}
\begin{itemize}[noitemsep]
\item one
\item two
\item three
\end{itemize}
\subsection{How to Make Revisions}
Make revisions according to the reviewers’ feedback. In addition to revising your manuscript, submit a response table separately from the manuscript (in a supplementary file). This file is mandatory; the editor reserves the right to consider that you have not made revisions in accordance with the reviewers’ instructions if this file is not included. Ensure that the table includes feedback from reviewers A, B, and C, along with your responses and the locations of your revisions in the manuscript.
\subsection{Ethics and maximum number of pages}
Do not fabricate, falsify, or plagiarize your articles; we will not tolerate these violations. You may use AI solely as a tool to assist you in conducting research and supporting the claims in your manuscript. Make sure the number of pages does not exceed 15 pages, including the authors' biographies.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%PEMBAHASAN %%%%%%%%%%%%%%%%%%%%%
\section{Discussion}
To write a good discussion section for an article, present a critical analysis rather than simply repeating the data. Begin by interpreting your findings, relate them to existing theories, compare them with previous research, and explain the practical implications and novelty of your work. This will help you craft a thorough and well-structured discussion.
Present Interpretations, Not Just Data: Explain the meaning behind the data or findings you have obtained. Do not simply list raw numbers or facts in this section. Relate to Theory: Analyze your findings using theoretical frameworks, concepts, or literature relevant to your article’s topic. Compare with Previous Research: Show whether your findings align with, complement, or contradict the results of previous studies. Provide logical arguments explaining why this might be the case. Outline Implications and Contributions: Explain the significance of your findings for the relevant academic field (theoretical implications) or for the general public (practical implications). Acknowledge Limitations (If Necessary): Be objective by acknowledging the weaknesses, biases, or methodological limitations of your research, and then provide recommendations for future research.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% SIMPULAN %%%%%%%%%%%%%%%%%%%%%%%%%
\section{Conclusion}
Restate your research topic. Usually, one sentence is enough to clearly restate the topic, and you will explain why your topic is important. This part of your conclusion should be clear and concise and state only the most important information; do not write it in the form of a numbered list or bullet points—simply present it \textbf{\textit{in a complete paragraph}}.
You can summarize the main points of your research. It is helpful to read through your paper and select the most relevant facts and arguments. You do not need to include much information beyond the main arguments or facts you presented in your paper.
After discussing the main points of your argument, you can highlight their significance. For example, after stating the main points you’ve made in your argument, you can discuss how your topic impacts specific outcomes. Similarly, you can present other study results or findings that help emphasize the importance of your information.
You can also provide references \cite{Rikie} to strengthen your conclusions. If you wish to offer suggestions, do so by referring to what you believe might be done and is closely related to the research results. Suggestions in an article are recommendations, not requirements\cite{Rikie}.
%\appendix %Opsional jika Anda membutuhka nnya
\section*{Acknowledgments (recommended)*}
The authors would like to thank ... ... ... \textbf{THIS SECTION IS OPTIONAL}
\section*{Funding sources (recommended)*}
Please provide the funding sources for the research underlying this article \textbf{THIS SECTION IS OPTIONAL}.
\section*{Ethical Clearance}
Authors must secure ethical approval from an appropriate institutional ethics, ethics committee, or other competent authority prior to beginning data collection for research involving:
\begin{enumerate}[noitemsep]
\item Human participants (e.g., students, teachers, interviewees, survey respondents).
\item Personal, sensitive, or identifiable information.
\item Educational interventions, experimental instruction, or classroom-based studies.
\end{enumerate}
Authors should indicate clearly in the manuscript that ethical approval was obtained and include the name of the approving institution and approval reference number where applicable. \textbf{This statement is mandatory}.
\section*{AI Usage Statement}
In preparing this manuscript, the author used [Name of AI Tool] for the purpose of [e.g., grammar correction and literature summarization]. After using the tool, the author conducted a thorough review and editing of the content and assumes full responsibility for the final published version. \textbf{This statement is mandatory}.
\section*{Credit Authorship Contribution Statment}
Please describe the authors’ contributions (including their initials) and their roles in the research and writing of this article. \textbf{This section is mandatory}; the Editor reserves the right to delay the publication of your article if this section is not include
\section*{Declaration Of Competing Interests}
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. \textbf{This statement is mandatory}.
\section*{Data Availability}
\textbf{This statement is mandatory}. Add your statement about your data and availability of yor data.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% PUSTAKA %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\renewcommand{\refname}{Pustaka} %%% nonaktifkan bila artikel bahasa inggris
\bibliographystyle{IEEEtran}
\bibliography{reference}
%\newpage
\section*{BIOGRAPHIES OF AUTHORS}
%% make sure to add \vspace{-.7em} before \begin{biography}
\vspace{-.7em}
\begin{biography}[{\includegraphics[width=2.5cm,height=5cm,clip,keepaspectratio]{photoauthor}}]
\textbf{First Author}
He/she earned a Master’s degree in Computer Science from Gadjah Mada University (2016) and a Ph.D. in Information Technology from the Bandung Institute of Technology (2021). He currently serves as a tenured faculty member in the Computer Engineering Program at Digital Nusantara University.
Research interests include Machine Learning, Natural Language Processing, and Big Data Analytics, with a teaching focus on Artificial Intelligence and Databases. He is actively involved in various research grants from the Ministry of Education and Culture and serves as the Head of the Intelligent Computing Laboratory. His publications appear in accredited national journals and international conference proceedings.
\end{biography}
\vspace{-.7em}
\begin{biography}[{\includegraphics[width=2.5cm,height=5cm,clip,keepaspectratio]{photoauthor}}]
\textbf{Second Author}
Completed a Master’s degree in Electrical Engineering at the University of Indonesia (2018). Currently serves as a lecturer in the Department of Telecommunications Engineering at Surya Mandiri Institute of Technology.
His research interests include Wireless Sensor Networks, Embedded Systems, and Robotics. He teaches courses on Microprocessor Systems and Sensor Networks. He has received applied research grants from the Ministry of Research and Technology for two consecutive terms. In addition to teaching, he serves as the Program Secretary and manages the university’s internal journal.
\end{biography}
\vspace{-.7em}
\begin{biography}[{\includegraphics[width=2.5cm,height=5cm,clip,keepaspectratio]{photoauthor}}]
\textbf{Third Author}
He/she earned a Master’s degree in Computer Engineering from Telkom University (2015). He is currently a tenured lecturer in the Faculty of Computer Science at Multimedia Cendekia University.
His research focuses on cybersecurity, digital forensics, and cloud computing, with teaching experience in network security and operating system architecture. He has secured several research grants from private and national research institutions. In addition to his academic duties, he also serves as the Coordinator of the Center for Cybersecurity Studies and is active in community service related to digital literacy.
\end{biography}
%run it with pdflatex <file>, biber <file>, pdflatex <file>
%\begin{thebibliography}{00}
%
% \bibitem{1} G. R. D. T. Muntaner, “Evaluation of OpenFlow Controllers,” Tech. Rep., 2012. [Online]. Available:
% http://kth.diva-portal.org/smash/record.jsf?pid=diva2:563469
% \bibitem{2}D. Turull, M. Hidell, and P. Sjödin, “Performance evaluation of OpenFlow controllers for network virtualization,” High Perform. Switch. Routing (HPSR), 2014 IEEE 15th Int. Conf., pp. 50–56, 2014.
% \bibitem{3}G. Sdn and C. Testing, “ONOS Controller Performance Test Report,” Tech. Rep., 2016.
% \bibitem{4}I. T. S. Lab, “OpenDaylight Performance Stress Test Report,” Tech. Rep., 2016.ISSN: 2252-8776
% \bibitem{5}M. Sisov, “Building a Software-Defined Networking System with OpenDaylight Controller,” Ph.D. dissertation, Helsinki Metropolia University, 2016.
% \bibitem{6}S. Kaur, J. Singh, and N. Ghumman, “Network programmability using pox controller,” 08 2014.
% \bibitem{7}Yehdeya EF, Primasari CH, Sidhi TA, Wibisono YP, Setyohadi DB, Cininta M, "Analisis User Interface (UI) Dan User Experience (UX) Sudut Elevasi Pemukul Gamelan Metaverse Virtual Reality Menggunakan User Centered Design (UCD)", JIKO (Jurnal Informatika dan Komputer), 2023 Feb 6;7(1):137-46.
% \bibitem{8} A. Einstein, “Zur Elektrodynamik bewegter Körper. (German) [On the electrodynamics of moving bodies],”
% Annalen der Physik, vol. 322, no. 10, pp. 891–921, 1905.
% \bibitem{9} P. A. M. Dirac, The Principles of Quantum Mechanics, ser. International series of monographs on physics.
% Clarendon Press, 1981.
% \bibitem{10} R. E. Sorace, V. S. Reinhardt, and S. A. Vaughn, “High-speed digital-to-RF converter,” U.S. Patent
% 5 668 842, Sep. 16, 1997.
% \bibitem{11} M. Yajnik, S. B. Moon, J. Kurose, and D. Towsley, “Measurement and modeling of the temporal depen-
% dence in packet loss,” in Proc. IEEE INFOCOM’99, vol. 1, New York, NY, Mar. 1999, pp. 345–352.
% \bibitem{12} N. C. Loh, “High-resolution micromachined interferometric accelerometer,” Master’s thesis, Massachu-
% setts Institute of Technology, Cambridge, 1992.
% \bibitem{13} Q. Li, “Delay characterization and performance control of wide-area networks,” Ph.D. dissertation, Univ.
% of Delaware, Newark, May 2000. [Online]. Available: http://www.ece.udel.edu/~qli
% \bibitem{14}R. Hidayati, A. Zubair, A. H. Pratama, and L. Indana, “Analisis Silhouette Coefficient pada 6 Perhitungan Jarak K-Means Clustering,” Techno.Com, vol. 20, no. 2, Art. no. 2, May 2021, doi: 10.33633/tc.v20i2.4556.
% \bibitem{15} R. Kartadie, F. Rozi, and E. Utami, “Openflow switch software-based performance test on its implementation on campus network,” Journal of Theoretical and Applied Information Technology, vol. 96, pp.
% 4136–4146, 07 2018.
% \bibitem{16} J. P. Duque, D. D. Beltrán, and G. P. Leguizamón, “OpenDaylight vs . Floodlight : Comparative Analysis
% of a Load Balancing Algorithm for Software Defined Networking,” vol. 10, no. 2, pp. 348–357, 2018.
% \bibitem{17} S. Asadollahi and B. Goswami, “Experimenting with Scalability of Floodlight Controller in Software Defined Networks,” in Int. Conf. Electr. Electron. Commun. Comput. Optim. Tech. Exp., no. December,
% 2018, pp. 288–292.
%\end{thebibliography}
%\end{CJK*}
\end{document}
