genlaw-workshop-icml-2023
Author:
GenLaw Organizers
Last Updated:
2年前
License:
Creative Commons CC BY 4.0
Abstract:
The official style guide for the GenLaw '23 workshop
\begin
Discover why 18 million people worldwide trust Overleaf with their work.
The official style guide for the GenLaw '23 workshop
\begin
Discover why 18 million people worldwide trust Overleaf with their work.
%%%%%%%% GenLaw '23 SUBMISSION FILE; adpated from ICML '23 file %%%%%%%%%%%%%%%%%
\documentclass{article}
% Recommended, but optional, packages for figures and better typesetting:
\usepackage{microtype}
\usepackage{graphicx}
\usepackage{subfigure}
\usepackage{booktabs} % for professional tables
% hyperref makes hyperlinks in the resulting PDF.
% If your build breaks (sometimes temporarily if a hyperlink spans a page)
% please comment out the following usepackage line and replace
% \usepackage{icml2023} with \usepackage[nohyperref]{icml2023} above.
\usepackage{hyperref}
% Attempt to make hyperref and algorithmic work together better:
\newcommand{\theHalgorithm}{\arabic{algorithm}}
% Use the following line for the initial blind version submitted for review:
%\usepackage{icml2023}
% If accepted, instead use the following line for the camera-ready submission:
\usepackage[accepted]{icml2023}
% For theorems and such
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{mathtools}
\usepackage{amsthm}
% if you use cleveref..
\usepackage[capitalize,noabbrev]{cleveref}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% THEOREMS
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\theoremstyle{plain}
\newtheorem{theorem}{Theorem}[section]
\newtheorem{proposition}[theorem]{Proposition}
\newtheorem{lemma}[theorem]{Lemma}
\newtheorem{corollary}[theorem]{Corollary}
\theoremstyle{definition}
\newtheorem{definition}[theorem]{Definition}
\newtheorem{assumption}[theorem]{Assumption}
\theoremstyle{remark}
\newtheorem{remark}[theorem]{Remark}
% Todonotes is useful during development; simply uncomment the next line
% and comment out the line below the next line to turn off comments
%\usepackage[disable,textsize=tiny]{todonotes}
\usepackage[textsize=tiny]{todonotes}
% The \icmltitle you define below is probably too long as a header.
% Therefore, a short form for the running title is supplied here:
\icmltitlerunning{Formatting Instructions for GenLaw at ICML 2023}
\begin{document}
\twocolumn[
\icmltitle{Formatting Instructions for GenLaw at ICML 2023}
% It is OKAY to include author information, even for blind
% submissions: the style file will automatically remove it for you
% unless you've provided the [accepted] option to the icml2023
% package.
% List of affiliations: The first argument should be a (short)
% identifier you will use later to specify author affiliations
% Academic affiliations should list Department, University, City, Region, Country
% Industry affiliations should list Company, City, Region, Country
% You can specify symbols, otherwise they are numbered in order.
% Ideally, you should not use this facility. Affiliations will be numbered
% in order of appearance and this is the preferred way.
\icmlsetsymbol{equal}{*}
\begin{icmlauthorlist}
\icmlauthor{Firstname1 Lastname1}{equal,yyy}
\icmlauthor{Firstname2 Lastname2}{equal,yyy,comp}
\icmlauthor{Firstname3 Lastname3}{comp}
\icmlauthor{Firstname4 Lastname4}{sch}
\icmlauthor{Firstname5 Lastname5}{yyy}
\end{icmlauthorlist}
\icmlaffiliation{yyy}{Department of XXX, University of YYY, Location, Country}
\icmlaffiliation{comp}{Company Name, Location, Country}
\icmlaffiliation{sch}{School of ZZZ, Institute of WWW, Location, Country}
\icmlcorrespondingauthor{Firstname1 Lastname1}{first1.last1@xxx.edu}
\icmlcorrespondingauthor{Firstname2 Lastname2}{first2.last2@www.uk}
% You may provide any keywords that you
% find helpful for describing your paper; these are used to populate
% the "keywords" metadata in the PDF but will not be shown in the document
\icmlkeywords{Machine Learning, ICML}
\vskip 0.3in
]
% this must go after the closing bracket ] following \twocolumn[ ...
% This command actually creates the footnote in the first column
% listing the affiliations and the copyright notice.
% The command takes one argument, which is text to display at the start of the footnote.
% The \icmlEqualContribution command is standard text for equal contribution.
% Remove it (just {}) if you do not need this facility.
%\printAffiliationsAndNotice{} % leave blank if no need to mention equal contribution
\printAffiliationsAndNotice{\icmlEqualContribution} % otherwise use the standard text.
\begin{abstract}
This document provides a basic paper template (borrowed from the ICML '23 template). An abstract is optional, since submissions are themselves extended abstracts. If included, abstracts must be a single paragraph, ideally between 4--6 sentences long.\looseness=-1
\end{abstract}
\section{Format Requirements}
We borrow these requirements from the \emph{ICML '23} template:
\begin{itemize}
\item Please submit a zipfile with \textbf{all} associated files in it (click ``Submit'' on the top right, then scroll to and click ``Submit your paper to the arXiv,'' then click ``Download project ZIP with submission files (e.g, .bbl)''). \textbf{We will be converting the raw LaTeX files to html to host web-friendly versions on the GenLaw website.}
\item Page limit: Please respect a 3-page maximum using this template. We allow unlimited pages for references and an Appendix (optional).
\item Your paper should be in \textbf{10 point Times font}.
\item Make sure your PDF file only uses Type-1 fonts.
\item Place figure captions \emph{under} the figure (and omit titles from inside
the graphic file itself). Place table captions \emph{over} the table.
\item References must include page numbers whenever possible and be as complete
as possible. Place multiple citations in chronological order.
\item Do not alter the style template; in particular, do not compress the paper
format by reducing the vertical spaces.
\end{itemize}
\subsection{Dimensions}
The text of the paper should be formatted in two columns, with an
overall width of 6.75~inches, height of 9.0~inches, and 0.25~inches
between the columns. The left margin should be 0.75~inches and the top
margin 1.0~inch (2.54~cm). The right and bottom margins will depend on
whether you print on US letter or A4 paper, but all final versions
must be produced for US letter size.
Do not write anything on the margins.
The paper body should be set in 10~point type with a vertical spacing
of 11~points. Please use Times typeface throughout the text.
\subsection{Title}
The paper title should be set in 14~point bold type and centered
between two horizontal rules that are 1~point thick, with 1.0~inch
between the top rule and the top edge of the page. Capitalize the
first letter of content words and put the rest of the title in lower
case.
\subsection{Submitting Final Camera-Ready Copy}
Camera-ready copies should have the title of the paper as running head
on each page except the first one. The running title consists of a
single line centered above a horizontal rule which is $1$~point thick.
The running head should be centered, bold and in $9$~point type. The
rule should be $10$~points above the main text. For those using the
\textbf{\LaTeX} style file, the original title is automatically set as running
head using the \texttt{fancyhdr} package which is included in the ICML
2023 style file package. In case that the original title exceeds the
size restrictions, a shorter form can be supplied by using
\verb|\icmltitlerunning{...}|
just before $\mathtt{\backslash begin\{document\}}$.
For camera-ready papers, author information should start 0.3~inches below the
bottom rule surrounding the title. The authors' names should appear in 10~point
bold type, in a row, separated by white space, and centered. Author names should
not be broken across lines. Unbolded superscripted numbers, starting 1, should
be used to refer to affiliations.
Affiliations should be numbered in the order of appearance. A single footnote
block of text should be used to list all the affiliations. (Academic
affiliations should list Department, University, City, State/Region, Country.
Similarly for industrial affiliations.)
Each distinct affiliations should be listed once. If an author has multiple
affiliations, multiple superscripts should be placed after the name, separated
by thin spaces. If the authors would like to highlight equal contribution by
multiple first authors, those authors should have an asterisk placed after their
name in superscript, and the term ``\textsuperscript{*}Equal contribution"
should be placed in the footnote block ahead of the list of affiliations. A
list of corresponding authors and their emails (in the format Full Name
\textless{}email@domain.com\textgreater{}) can follow the list of affiliations.
Ideally only one or two names should be listed.
\subsection{Abstract}
An abstract is optional. If included, the paper abstract should begin in the left column, 0.4~inches below the final
address. The heading `Abstract' should be centered, bold, and in 11~point type.
The abstract body should use 10~point type, with a vertical spacing of
11~points, and should be indented 0.25~inches more than normal on left-hand and
right-hand margins. Insert 0.4~inches of blank space after the body. Keep your
abstract brief and self-contained, limiting it to one paragraph and roughly 4--6
sentences.
\subsection{Partitioning the Text}
You should organize your paper into sections and paragraphs to help
readers place a structure on the material and understand its
contributions.
\subsubsection{Sections and Subsections}
Section headings should be numbered, flush left, and set in 11~pt bold
type with the content words capitalized. Leave 0.25~inches of space
before the heading and 0.15~inches after the heading.
Similarly, subsection headings should be numbered, flush left, and set
in 10~pt bold type with the content words capitalized. Leave
0.2~inches of space before the heading and 0.13~inches afterward.
Finally, subsubsection headings should be numbered, flush left, and
set in 10~pt small caps with the content words capitalized. Leave
0.18~inches of space before the heading and 0.1~inches after the
heading.
Please use no more than three levels of headings.
\subsubsection{Paragraphs and Footnotes}
Within each section or subsection, you should further partition the
paper into paragraphs. Do not indent the first line of a given
paragraph, but insert a blank line between succeeding ones.
You can use footnotes\footnote{Footnotes
should be complete sentences.} to provide readers with additional
information about a topic without interrupting the flow of the paper.
Indicate footnotes with a number in the text where the point is most
relevant. Place the footnote in 9~point type at the bottom of the
column in which it appears. Precede the first footnote in a column
with a horizontal rule of 0.8~inches.\footnote{Multiple footnotes can
appear in each column, in the same order as they appear in the text,
but spread them across columns and pages if possible.}
\begin{figure}[ht]
\vskip 0.2in
\begin{center}
Picture goes here
\caption{Historical locations and number of accepted papers for International
Machine Learning Conferences (ICML 1993 -- ICML 2008) and International
Workshops on Machine Learning (ML 1988 -- ML 1992). At the time this figure was
produced, the number of accepted papers for ICML 2008 was unknown and instead
estimated.}
\label{icml-historical}
\end{center}
\vskip -0.2in
\end{figure}
\subsection{Figures}
You may want to include figures in the paper to illustrate
your approach and results. Such artwork should be centered,
legible, and separated from the text. Lines should be dark and at
least 0.5~points thick for purposes of reproduction, and text should
not appear on a gray background.
Label all distinct components of each figure. If the figure takes the
form of a graph, then give a name for each axis and include a legend
that briefly describes each curve. Do not include a title inside the
figure; instead, the caption should serve this function.
Number figures sequentially, placing the figure number and caption
\emph{after} the graphics, with at least 0.1~inches of space before
the caption and 0.1~inches after it, as in
\cref{icml-historical}. The figure caption should be set in
9~point type and centered unless it runs two or more lines, in which
case it should be flush left. You may float figures to the top or
bottom of a column, and you may set wide figures across both columns
(use the environment \texttt{figure*} in \LaTeX). Always place
two-column figures at the top or bottom of the page.
\subsection{Algorithms}
If you are using \LaTeX, please use the ``algorithm'' and ``algorithmic''
environments to format pseudocode. These require
the corresponding stylefiles, algorithm.sty and
algorithmic.sty, which are supplied with this package.
\cref{alg:example} shows an example.
\begin{algorithm}[tb]
\caption{Bubble Sort}
\label{alg:example}
\begin{algorithmic}
\STATE {\bfseries Input:} data $x_i$, size $m$
\REPEAT
\STATE Initialize $noChange = true$.
\FOR{$i=1$ {\bfseries to} $m-1$}
\IF{$x_i > x_{i+1}$}
\STATE Swap $x_i$ and $x_{i+1}$
\STATE $noChange = false$
\ENDIF
\ENDFOR
\UNTIL{$noChange$ is $true$}
\end{algorithmic}
\end{algorithm}
\subsection{Tables}
You may also want to include tables that summarize material. Like
figures, these should be centered, legible, and numbered consecutively.
However, place the title \emph{above} the table with at least
0.1~inches of space before the title and the same after it, as in
\cref{sample-table}. The table title should be set in 9~point
type and centered unless it runs two or more lines, in which case it
should be flush left.
% Note use of \abovespace and \belowspace to get reasonable spacing
% above and below tabular lines.
\begin{table}[t]
\caption{Classification accuracies for naive Bayes and flexible
Bayes on various data sets.}
\label{sample-table}
\vskip 0.15in
\begin{center}
\begin{small}
\begin{sc}
\begin{tabular}{lcccr}
\toprule
Data set & Naive & Flexible & Better? \\
\midrule
Breast & 95.9$\pm$ 0.2& 96.7$\pm$ 0.2& $\surd$ \\
Cleveland & 83.3$\pm$ 0.6& 80.0$\pm$ 0.6& $\times$\\
Glass2 & 61.9$\pm$ 1.4& 83.8$\pm$ 0.7& $\surd$ \\
Credit & 74.8$\pm$ 0.5& 78.3$\pm$ 0.6& \\
Horse & 73.3$\pm$ 0.9& 69.7$\pm$ 1.0& $\times$\\
Meta & 67.1$\pm$ 0.6& 76.5$\pm$ 0.5& $\surd$ \\
Pima & 75.1$\pm$ 0.6& 73.9$\pm$ 0.5& \\
Vehicle & 44.9$\pm$ 0.6& 61.5$\pm$ 0.4& $\surd$ \\
\bottomrule
\end{tabular}
\end{sc}
\end{small}
\end{center}
\vskip -0.1in
\end{table}
Tables contain textual material, whereas figures contain graphical material.
Specify the contents of each row and column in the table's topmost
row. Again, you may float tables to a column's top or bottom, and set
wide tables across both columns. Place two-column tables at the
top or bottom of the page.
\subsection{Theorems and such}
The preferred way is to number definitions, propositions, lemmas, etc. consecutively, within sections, as shown below.
\begin{definition}
\label{def:inj}
A function $f:X \to Y$ is injective if for any $x,y\in X$ different, $f(x)\ne f(y)$.
\end{definition}
Using \cref{def:inj} we immediate get the following result:
\begin{proposition}
If $f$ is injective mapping a set $X$ to another set $Y$,
the cardinality of $Y$ is at least as large as that of $X$
\end{proposition}
\begin{proof}
Left as an exercise to the reader.
\end{proof}
\cref{lem:usefullemma} stated next will prove to be useful.
\begin{lemma}
\label{lem:usefullemma}
For any $f:X \to Y$ and $g:Y\to Z$ injective functions, $f \circ g$ is injective.
\end{lemma}
\begin{theorem}
\label{thm:bigtheorem}
If $f:X\to Y$ is bijective, the cardinality of $X$ and $Y$ are the same.
\end{theorem}
An easy corollary of \cref{thm:bigtheorem} is the following:
\begin{corollary}
If $f:X\to Y$ is bijective,
the cardinality of $X$ is at least as large as that of $Y$.
\end{corollary}
\begin{assumption}
The set $X$ is finite.
\label{ass:xfinite}
\end{assumption}
\begin{remark}
According to some, it is only the finite case (cf. \cref{ass:xfinite}) that is interesting.
\end{remark}
%restatable
\subsection{Citations and References}
Please use APA reference format regardless of your formatter
or word processor. If you rely on the \LaTeX\/ bibliographic
facility, use \texttt{natbib.sty} and \texttt{icml2023.bst}
included in the style-file package to obtain this format.
Citations within the text should include the authors' last names and
year. If the authors' names are included in the sentence, place only
the year in parentheses, for example when referencing Arthur Samuel's
pioneering work \yrcite{Samuel59}. Otherwise place the entire
reference in parentheses with the authors and year separated by a
comma \cite{Samuel59}. List multiple references separated by
semicolons \cite{kearns89,Samuel59,mitchell80}. Use the `et~al.'
construct only for citations with three or more authors or after
listing all authors to a publication in an earlier reference \cite{MachineLearningI}.
Use an unnumbered first-level section heading for the references, and use a
hanging indent style, with the first line of the reference flush against the
left margin and subsequent lines indented by 10 points. The references at the
end of this document give examples for journal articles \cite{Samuel59},
conference publications \cite{langley00}, book chapters \cite{Newell81}, books
\cite{DudaHart2nd}, edited volumes \cite{MachineLearningI}, technical reports
\cite{mitchell80}, and dissertations \cite{kearns89}.
Alphabetize references by the surnames of the first authors, with
single author entries preceding multiple author entries. Order
references for the same authors by year of publication, with the
earliest first. Make sure that each reference includes all relevant
information (e.g., page numbers).
Please put some effort into making references complete, presentable, and
consistent, e.g. use the actual current name of authors.
If using bibtex, please protect capital letters of names and
abbreviations in titles, for example, use \{B\}ayesian or \{L\}ipschitz
in your .bib file.
\section*{Accessibility}
Authors are kindly asked to make their papers as accessible as possible for everyone including people with disabilities and sensory or neurological differences.
Tips of how to achieve this and what to pay attention to will be provided on the conference website \url{http://icml.cc/}.
\section*{Software and Data}
We strongly encourage the publication of software and data with the
camera-ready version of the paper whenever appropriate. This can be
done by including a URL in the camera-ready copy.
% Acknowledgements should only appear in the accepted version.
\section*{Acknowledgements}
The final camera-ready version can (and
probably should) include acknowledgements. In this case, please
place such acknowledgements in an unnumbered section at the
end of the paper. Typically, this will include thanks to reviewers
who gave useful comments, to colleagues who contributed to the ideas,
and to funding agencies and corporate sponsors that provided financial
support.
% In the unusual situation where you want a paper to appear in the
% references without citing it in the main text, use \nocite
\nocite{langley00}
\bibliography{example_paper}
\bibliographystyle{icml2023}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% APPENDIX
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\newpage
\appendix
\onecolumn
\section{You \emph{can} have an appendix here.}
You can have as much text here as you want. The main body must be at most $8$ pages long.
For the final version, one more page can be added.
If you want, you can use an appendix like this one, even using the one-column format.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\end{document}
% This document was modified from the file originally made available by
% Pat Langley and Andrea Danyluk for ICML-2K. This version was created
% by Iain Murray in 2018, and modified by Alexandre Bouchard in
% 2019 and 2021 and by Csaba Szepesvari, Gang Niu and Sivan Sabato in 2022.
% Modified again in 2023 by Sivan Sabato and Jonathan Scarlett.
% Previous contributors include Dan Roy, Lise Getoor and Tobias
% Scheffer, which was slightly modified from the 2010 version by
% Thorsten Joachims & Johannes Fuernkranz, slightly modified from the
% 2009 version by Kiri Wagstaff and Sam Roweis's 2008 version, which is
% slightly modified from Prasad Tadepalli's 2007 version which is a
% lightly changed version of the previous year's version by Andrew
% Moore, which was in turn edited from those of Kristian Kersting and
% Codrina Lauth. Alex Smola contributed to the algorithmic style files.