Rupal Lohani's CV (a sample CV for a Undergraduate BTECH student). Created with the AltaCV template.
\begin
Discover why 18 million people worldwide trust Overleaf with their work.
%%%%%%%%%%%%%%%%%
% This is an example CV created using altacv.cls (v1.1.5, 1 December 2018) written by
% LianTze Lim (liantze@gmail.com), based on the
% Cv created by BusinessInsider at http://www.businessinsider.my/a-sample-resume-for-marissa-mayer-2016-7/?r=US&IR=T
%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of LaTeX
%% version 2003/12/01 or later.
%%%%%%%%%%%%%%%%
%% If you are using \orcid or academicons
%% icons, make sure you have the academicons
%% option here, and compile with XeLaTeX
%% or LuaLaTeX.
% \documentclass[10pt,a4paper,academicons]{altacv}
%% Use the "normalphoto" option if you want a normal photo instead of cropped to a circle
% \documentclass[10pt,a4paper,normalphoto]{altacv}
\documentclass[10pt,a4paper,ragged2e]{altacv}
%% AltaCV uses the fontawesome and academicon fonts
%% and packages.
%% See texdoc.net/pkg/fontawecome and http://texdoc.net/pkg/academicons for full list of symbols. You MUST compile with XeLaTeX or LuaLaTeX if you want to use academicons.
% Change the page layout if you need to
\geometry{left=2cm,right=10cm,marginparwidth=6.8cm,marginparsep=1.2cm,top=1.25cm,bottom=1.25cm}
% Change the font if you want to, depending on whether
% you're using pdflatex or xelatex/lualatex
\ifxetexorluatex
% If using xelatex or lualatex:
\setmainfont{Carlito}
\else
% If using pdflatex:
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage[default]{lato}
\fi
% Change the colours if you want to
\definecolor{VividPurple}{HTML}{000000}
\definecolor{SlateGrey}{HTML}{2E2E2E}
\definecolor{LightGrey}{HTML}{2E2E2E}
\colorlet{heading}{VividPurple}
\colorlet{accent}{VividPurple}
\colorlet{emphasis}{SlateGrey}
\colorlet{body}{LightGrey}
% Change the bullets for itemize and rating marker
% for \cvskill if you want to
\renewcommand{\itemmarker}{{\small\textbullet}}
\renewcommand{\ratingmarker}{\faCircle}
%% sample.bib contains your publications
\addbibresource{sample.bib}
\begin{document}
\name{Rupal Lohani}
\tagline{Computer science Engineer}
% Cropped to square from https://en.wikipedia.org/wiki/Marissa_Mayer#/media/File:Marissa_Mayer_May_2014_(cropped).jpg, CC-BY 2.0
%\photo{3.3cm}{profile.jpg}
\personalinfo{%
% Not all of these are required!
% You can add your own with \printinfo{symbol}{detail}
\email{rupallohani@gmail.com}
% \phone{000-00-0000}
% \mailaddress{Address, Street, 00000 County}
\location{Delhi, India}
% \homepage{marissamayr.tumblr.com/}
% \twitter{@marissamayer}
\linkedin{linkedin.com/in/rupal-lohani}
\github{github.com/rupalz} % I'm just making this up though.
% \orcid{orcid.org/0000-0000-0000-0000} % Obviously making this up too. If you want to use this field (and also other academicons symbols), add "academicons" option to \documentclass{altacv}
}
%% Make the header extend all the way to the right, if you want.
\begin{fullwidth}
\makecvheader
\end{fullwidth}
%% Depending on your tastes, you may want to make fonts of itemize environments slightly smaller
\AtBeginEnvironment{itemize}{\small}
%% Provide the file name containing the sidebar contents as an optional parameter to \cvsection.
%% You can always just use \marginpar{...} if you do
%% not need to align the top of the contents to any
%% \cvsection title in the "main" bar.
\cvsection[page1sidebar]{Experience}
\cvevent{Contributer in FOSS@amrita}{Amrita Vishwa Vidyapeetham,Amritapuri}{July 2019 -- Present}{Kerala,India}
\begin{itemize}
\item FOSS@amrita is a free and a open source Software club.
\end{itemize}
\divider
\cvevent{Participated in Machine Learning Workshop}{}{March 2019--April 2019}{Kerala,India}
\begin{itemize}
\item It was a brief introduction of ML and its brnches conducted by IEEE students club of Amrita Vishwa Vidyapeetham,Amritapuri
\end{itemize}
\divider
\cvevent{Participated in GHCI Codeathlon for Women students} {}{May 28 2019--May 29 2019}{Bangalore,India}
\begin{itemize}
\item It was organized by AnitaB.org which focusses on AI and Data Sciences for Women Students.
\end{itemize}
\divider
\cvevent{Participated in BOOTSTRAP PARADOX HACKATHON}{}{Aug 3 2019-- Aug 4 2019}{Bangalore,India}
\begin{itemize}
\item It was organized by Skillenza in Microsoft office, Bangalore. It was a professional only hackathon where only 2 student team were selected and was lucky to be one of them.
\end{itemize}
\divider
\cvevent{Participated in Smart Mobility Hackathon }{}{Aug 7 2019--Aug 9 2019}{Mumbai,India}
\begin{itemize}
\item It was powered by HERE Technologies which focused on solving Mobility Challenges and aimed to engage with developers and startup founders using HERE Location Services.
\end{itemize}
%\divider
\cvsection{Achievements}
\smallskip
\begin{itemize}
\item Secured 8.8/10 CGPA in my first year of graduation.
\smallskip
\item Secured 87.6 percentage in Higher Secondary School Examination.
\smallskip
\item Won silver medal in badminton on state level representing New Delhi
\smallskip
\item Attained bachelor degree in Kathak Dance.
\smallskip
\item Won gold medal in Swimming on district level.
\end{itemize}
\cvsection{SKILLS}
\cvskill{C++,C}{4}
\cvskill{Python}{3}
\cvskill {java}{3}
\cvskill{linux}{4}
\cvskill{Frontend}{3}
\cvskill{Backend}{3}
\cvskill{Web dev}{4}
\cvskill{Android dev}{2}
%\divider
% \cvevent{Product Engineer}{Google}{23 June 1999 -- 2001}{Palo Alto, CA}
% \begin{itemize}
% \item Joined the company as employe \#20 and female employee \#1
% \item Developed targeted advertisement in order to use user's search queries and show them related ads
% \end{itemize}
%\cvsection{A Day of My Life}
% Adapted from @Jake's answer from http://tex.stackexchange.com/a/82729/226
% \wheelchart{outer radius}{inner radius}{
% comma-separated list of value/text width/color/detail}
% Some ad-hoc tweaking to adjust the labels so that they don't overlap
% \wheelchart{1.5cm}{0.5cm}{%
% 10/10em/accent!30/Sleeping \& dreaming about work,
% 25/9em/accent!60/Public resolving issues with Yahoo!\ investors,
% 5/13em/accent!10/\footnotesize\\[1ex]New York \& San Francisco Ballet Jawbone board member,
% 20/15em/accent!40/Spending time with family,
% 5/8em/accent!20/\footnotesize Business development for Yahoo!\ after the Verizon acquisition,
% 30/9em/accent/Showing Yahoo!\ employees that their work has meaning,
% 5/8em/accent!20/Baking cupcakes
% }
\clearpage
% \cvsection[page2sidebar]{Publications}
\nocite{*}
% \printbibliography[heading=pubtype,title={\printinfo{\faBook}{Books}},type=book]
% \divider
% \printbibliography[heading=pubtype,title={\printinfo{\faFileTextO}{Journal Articles}}, type=article]
% \divider
% \printbibliography[heading=pubtype,title={\printinfo{\faGroup}{Conference Proceedings}},type=inproceedings]
% %% If the NEXT page doesn't start with a \cvsection but you'd
% %% still like to add a sidebar, then use this command on THIS
% %% page to add it. The optional argument lets you pull up the
% %% sidebar a bit so that it looks aligned with the top of the
% %% main column.
% % \addnextpagesidebar[-1ex]{page3sidebar}
\end{document}